Harley Tillotson Carburetor Air Cleaner Plate FX/FL Shovelhead, OEM 1967-70

First generation oval, specific to the Tillotson.  The Bendix and Keihin, with their air bleed hole requirements, required a different plate and inner diameter.  So this plate is for the Tillotson, only.

Outer perimeter ring is square and free from distortions.  And all the flange bolt holes are good, so no cracks are present.  When viewed from the back side, you will note an added hole in the upper right hand area.  So this should be plugged with a bolt or suitable rubber cap.  However, the hole in the lower left area is correct.

• Condition:   Used
• Type:   FX, FL
• Vintage:   1967-70

121820  CR-4  (OS)