Sorry but this item is currently unavailable.
Please check back at a later stage.
Harley Screamin Eagle Performance Carburetor, 1 3/4" Bore (Needs Main Jet)
OEM, Factory performance carburetor, intended to compete with the S&S Super E. It features a 1 6/8" bore, compared to the Super E at 1 7/8". So they both flow similar volumes of air.
Condition, in general, is quite good. Fairly dry and clean with no moisture intrusion or finish wear. The assembly appears complete, apart from a main jet, which is missing. So a new main jet will be required. Also needed is a new fuel inlet elbow; we recommend the solid brass type, when possible. Like all original inlets with the plastic elbows, they invariably crack, which is also the case with the inlet on this use. So inlet elbow replacement should be assumed.
Complete cleaning and rebuild kit required prior to use.
CONFIGURATION NOTE: Screamin Eagle carburetor assemblies came in two styles: Flange mount and spigot mount. This is the spigot mount style, and a manifold and rubber manifold adapter was used, originally. So more research may be required if you are unfamiliar with the Screamin Eagle Carburetor assemblies and their configurations.
082721 CR-3 (21 07 18, 1-49)