Sorry but this item is currently unavailable.
Please check back at a later stage.
Harley FXST Softail Forward Shifter Control Plate, 1987-99 (3" Over Stock)
This shifter plate has an extended reach measuring approximately 3" over stock. It utilizes the stock shifter shaft but a longer control rod is required. Offered is only the shifter side, as pictured. In general, use is for Evolution-era FXST models from 1987-99.
Square condition, no damage or distortions. Very solid steel plate stock. Paint finish is fairly decent with normal finish wear, scratches, minor blemishes, etc., but refinishing is straightforward if desired.
NOTE: you will notice that that shifter shaft uses a series of spacers/shims. One washer on the inside, and a set of shims on the outside. Originally, "O" ring seals and a spring-like wafer washer is used to take up the play. As configured, shaft movement is clean and smooth with no binding. But some builders may wish to update with the original seals and washer.
040921 CR-2 (17 11 26, 7-4) (21 03 28, 15-1)