Harley Dual Flange Wheel Hub, REAR (7/16" x 7/16" Rotor/Sprocket Mount Holes)

We don't have precise application data, but based on the differing flange offsets, we are supposing this to be a REAR Hub. Specifically, one side has approximately 1 5/16" of offset while the other side has a marginally narrower offset of approximately 1 1/16".  Flange rotor/sprocket bolt holes, on both sides, are 7/16" diameter.

Original black paint finish still looks pretty good.  Bearing races are present on both sides, and the machined surfaces still look clean with only minor pitting. 

Also, we are noting some egging in some of the rotor/sprocket bolt holes.  In our view, it is not excessive.  But it is evident.

• Condition:  Used
• Type:   Shovelhead, Evolution
• Vintage:  

032521  CR-2  (OS)