Sorry but this item is currently unavailable.
Please check back at a later stage.
K Model & XL Ironhead Sportster Rear Axle, 1952-78 (OEM, 5/8" x 11 1/8")
Fundamentals are very good, and there is no evidence of hub bearing ridging. Threads are straight and clean. You will note there is a fold on one of the hex peaks. However, the remaining flats are square, and the swing arm locking steps remain well-machined.
Factory references show the same axle and part number for both K and XL models from 1952-78. Axle length is 11 1/8" and width is 5/8".